| 护坡砖模具采购商如何避免上当受骗 |
| 添加时间：2018/12/26 15:27:18 浏览次数： |
| 随着我国道路建设也发展的不断加速,护坡砖模具的市场地位也越来越高,各地模具厂家的发展也越来越迅速。主要分为了订单式生产和小规模生产,订单式生产主要都是根据客户订单来进行设计大批量进行生产的,而小规模生产的客户主要的规格还是通用的规格,主要应用于道路的修葺。虽然发展迅速,但是设计方面还处于停滞阶段,因此模具制造周期长,成本高,过程相对复杂,不能同时进行生产,都有可能延长生产周期。 With the accelerating development of road construction in our country, the market position of slope protection brick mould is getting higher and higher, and the development of mould manufacturers around the country is also more and more rapid. Mainly divided into order-based production and small-scale production, order-based production is mainly designed according to customer orders for mass production, and the main specifications of small-scale production customers or general specifications, mainly used in road repair. Despite the rapid development, but the design is still at a stagnant stage, so the mould manufacturing cycle is long, the cost is high, the process is relatively complex, can not be produced at the same time, it is possible to extend the production cycle. 许多采购商在采购完护坡砖模具进行生产护坡砖常常会出现一些无关紧要的小毛病,如:模具掉角、出模难、出模破损率高等。其遇到这种原因首先会想到的是其护坡砖模具不是合格产品而是以次充好,其实不然,模具在长时间使用过程中由于工人的不注意或不小心常常会弄坏角,但并不会影响使用以及脱模出来的护坡砖的光滑效果,而出模难、出模破损率高的主要原因是润滑剂没有刷全面以及触摸时间过短或过长等造成的。 Many purchasers often have some minor defects in the production of slope protection tiles after purchasing the mould of slope protection tiles, such as the angle drop of the mould, the difficulty of die drawing and the high rate of die breakage. The first thing that comes to mind is that the moulds of slope protection bricks are not qualified products, but filling them with inferior ones. In fact, the moulds often break corners due to carelessness or carelessness of the workers during long-term use, but it will not affect the smooth effect of the slope protection bricks used and demoulded. The main reasons for the difficulty in demoulding and the high breakage rate of the moulds are that the lubricants are not brushed comprehensively and that the moulds are not demoulded. The touch time is too short or too long. 许多护坡砖模具购买商在购买模具时都是通过电话的方式购买,但是有的黑心厂家缺使用废料以次充好,而一些模具购买商还不知道其厂家的具体地址,为了避免这一情况的发生最有效的方法就是实地考察,确认这个企业是否有自己的生产车间、规模、实力大小以及地址所在。而最后就算上当受骗也能找到其地址,要求退货换货。 Many purchasers of slope protection brick moulds buy moulds by telephone, but some black-core manufacturers lack the use of scrap to fill the mold, and some die buyers do not know the specific address of their manufacturers. In order to avoid this situation, the most effective way is to investigate on the spot and confirm whether the enterprise has its own production workshop, scale, strength and address. Where. In the end, even if deceived, they can find their address and ask for refund and exchange of goods. |
| 上一页 护坡砖模具材料的表面刚度和抗划痕特性很好 |
| 下一页 在园林中常用的护坡材料 |