保定护坡模具加工厂

Slope protection mold has also become a part of the high-tech industry. For the promotion of modern manufacturing industry, as the basis of manufacturing mold has a very important role in the future research direction of slope protection mold? Below, my factory with you to explore.

国产护坡模具还存在一些缺陷,国产护坡砖模具设备在机床行业市场中的占有率很低,即使是在目前任务饱满的情况下,也应从长远发展出发,从战略高度去认识,并对这一市场进行充分研究与正确定位.特别是在中低档数控设备方面,国内企业也一样是大有可为的. 针对护坡模具的这种缺陷,国外企业非常重视,一方面,重点关注模具内冷却,减少用喷涂解决模具温度平衡,减少喷涂时间,减少铸件在模具上的冷却时间,提高生产节奏,提高压铸生产效率;另一方面,重点关注模具拆装的快速,以及减少模具维修维护,更换易损件的时间。大型护坡模具安装、拆卸如采用人工压压板等传统方式是非常占用时间的,通常需要一个班次.而国外,无论是压铸机还是压铸模具,都非常重视这个问题,包括模具的定位、模具的夹紧、顶出复位杆安装、行程开关连接、抽芯油缸油管连接、冷却水管连接等等,都做到快速连接,并且如果模具需要几个油缸或行程开关的接头在模具上串、并联好,做的非常人性化.而在型芯更换等其它细小环节上都下足了功夫,充分考虑了模具的使用性、模具的生产效率。

There are still some shortcomings in the domestic slope protection mold. The market share of domestic slope protection brick mold equipment in the machine tool industry is very low. Even under the current full task, we should start from the long-term development, from the strategic height, and make a full study and correct positioning of this market. In view of this defect, foreign enterprises attach great importance to it. On the one hand, they focus on cooling in the mold, reduce the temperature balance of the mold by spraying, reduce the spraying time, reduce the cooling time of the castings on the mold, improve the production rhythm, and improve the production efficiency of die casting; on the other hand, heavy duty Pay attention to the rapid disassembly and assembly of mould, and reduce the time of mold maintenance and replacement. The installation and disassembly of large-scale slope protection dies, such as the use of manual pressing plates and other traditional methods, is very time-consuming, and usually requires a shift. Pipe connection, cooling water pipe connection and so on, all achieve the fast connection, and if the mold needs several cylinders or stroke switch connectors on the mold in series, parallel good, do very humanized.

护坡模具的安装或拆卸应该非常迅速,这样就能大大的节约了时间,提高了生产效率.因此,这是中国护坡模具企业以及企业重点关注的问题,也是护坡模具未来的研究方向之一。

The installation or disassembly of slope protection mold should be very rapid, which can greatly save time and improve production efficiency. Therefore, this is the focus of Chinese slope protection mold enterprises and enterprises, and is also one of the future research directions of slope protection mold.